Skip to content
52 × 30 mm · 4 mm keyring eyelet

Design your Recycled PVC keyfob, Pro chip

This is drawn at the size the object really is, from the same file the laser cuts — what you see here is what you get handed back. It reads 3.5–5.6 cm; change the material and that number changes with it, in front of you.

The front of the pvc keyfobThe back of the pvc keyfob

The dashed white line is the cutting tolerance; the copper band is the antenna, where a solid mark stops the card reading.

Material

Four-colour print under a laminate.

Chip

The Pro chip adds $20 to any card and changes nothing about the artwork — the price bar below follows as you switch.

Etched in capitals. It is the line people read from across a table.

Leave it out and the card belongs to you rather than to a job.

Logo

Four-colour print under a laminate. A flat, single-colour version cuts best — under 200 KB, and a PNG is scaled down for you.

For the phone in front of you that will not do NFC. Every card gets its own code — the pattern is filled in when the tag is encoded, so the preview shows the reserved area at true size.

Mark colour

Ink can be any colour, white included — it is laid down as its own pass. What print cannot do is survive a back pocket the way an etched mark does.

A soft laminate over the print. It does not glare back at a phone camera.

readyEverything clears the trim edge and the antenna.

Recycled PVC keyfob

Edit this card

Material

Four-colour print under a laminate.

Chip

The Pro chip adds $20 to any card and changes nothing about the artwork — the price bar below follows as you switch.

Etched in capitals. It is the line people read from across a table.

Leave it out and the card belongs to you rather than to a job.

Logo

Four-colour print under a laminate. A flat, single-colour version cuts best — under 200 KB, and a PNG is scaled down for you.

For the phone in front of you that will not do NFC. Every card gets its own code — the pattern is filled in when the tag is encoded, so the preview shows the reserved area at true size.

Mark colour

Ink can be any colour, white included — it is laid down as its own pass. What print cannot do is survive a back pocket the way an etched mark does.

A soft laminate over the print. It does not glare back at a phone camera.

readyEverything clears the trim edge and the antenna.

Recycled PVC keyfob · pro chip$116.00each
Total$116.00
reads 3.5–5.6 cm