Skip to content
52 × 30 mm · 4 mm keyring eyelet

Design your Brushed steel keyfob, Pro chip

This is drawn at the size the object really is, from the same file the laser cuts — what you see here is what you get handed back. It reads 7–14 mm; change the material and that number changes with it, in front of you.

The front of the steel keyfobThe back of the steel keyfob

The dashed white line is the cutting tolerance; the copper band is the antenna, where a solid mark stops the card reading.

Material

Laser-etched through the brushed face.

Chip

The Pro chip adds $20 to any card and changes nothing about the artwork — the price bar below follows as you switch.

Etched in capitals. It is the line people read from across a table.

Leave it out and the card belongs to you rather than to a job.

Logo

Laser-etched through the brushed face. A flat, single-colour version cuts best — under 200 KB, and a PNG is scaled down for you.

For the phone in front of you that will not do NFC. Every card gets its own code — the pattern is filled in when the tag is encoded, so the preview shows the reserved area at true size.

Mark colour

Steel takes a mark two ways and neither is a colour: frosted lighter than the brushing, or annealed to near-black without cutting. Anything else is a print, and this card is not printed.

One pass. You feel the mark more than you see it, and nothing is removed.

readyEverything clears the trim edge and the antenna.

Brushed steel keyfob

Edit this card

Material

Laser-etched through the brushed face.

Chip

The Pro chip adds $20 to any card and changes nothing about the artwork — the price bar below follows as you switch.

Etched in capitals. It is the line people read from across a table.

Leave it out and the card belongs to you rather than to a job.

Logo

Laser-etched through the brushed face. A flat, single-colour version cuts best — under 200 KB, and a PNG is scaled down for you.

For the phone in front of you that will not do NFC. Every card gets its own code — the pattern is filled in when the tag is encoded, so the preview shows the reserved area at true size.

Mark colour

Steel takes a mark two ways and neither is a colour: frosted lighter than the brushing, or annealed to near-black without cutting. Anything else is a print, and this card is not printed.

One pass. You feel the mark more than you see it, and nothing is removed.

readyEverything clears the trim edge and the antenna.

Brushed steel keyfob · pro chip$216.00each
Total$216.00
reads 7–14 mm